2SC5198 2006-11-10 1 toshiba transistor silic on npn triple diffused type 2SC5198 power amplifier applications ? high breakdown voltage: v ceo = 140 v (min) ? complementary to 2sa1941 ? suitable for use in 70-w high fide lity audio amplifier?s output stage absolute maximum ratings (tc = 25c) characteristics symbol rating unit collector-base voltage v cbo 140 v collector-emitter voltage v ceo 140 v emitter-base voltage v ebo 5 v collector current i c 10 a base current i b 1 a collector power dissipation (tc = 25c) p c 100 w junction temperature t j 150 c storage temperature range t stg ? 55 to 150 c note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage a nd the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/derating concept and methods) and indi vidual reliability data (i.e. reliability test report and estimated failure rate, etc). unit: mm jedec D jeita D toshiba 2-16c1a weight: 4.7 g (typ.)
2SC5198 2006-11-10 2 electrical characteristics (tc = 25c) characteristics symbol test condition min typ. max unit collector cut-off current i cbo v cb = 140 v, i e = 0 D D 5.0 a emitter cut-off current i ebo v eb = 5 v, i c = 0 D D 5.0 a collector-emitter breakdown voltage v (br) ceo i c = 50 ma, i b = 0 140 D D v h fe (1) (note) v ce = 5 v, i c = 1 a 55 D 160 dc current gain h fe (2) v ce = 5 v, i c = 5 a 35 83 D collector-emitter saturation voltage v ce (sat) i c = 7 a, i b = 0.7 a D 0.3 2.0 v base-emitter voltage v be v ce = 5 v, i c = 5 a D 0.9 1.5 v transition frequency f t v ce = 5 v, i c = 1 a D 30 D mhz collector output capacitance c ob v cb = 10 v, i e = 0, f = 1 mhz D 170 D pf note: h fe (1) classification r: 55 to 110, o: 80 to 160 marking c5198 toshiba lot no. characteristics indicator a line indicates lead (pb)-free package or lead (pb)-free finish. part no. (or abbreviation code)
2SC5198 2006-11-10 3 collector current i c (a) collector-emitter saturation voltage v ce (sat) (v) v ce (sat) ? i c collector-emitter voltage v ce (v) i c ? v ce collector current i c (a) i c ? v be collector current i c (a) h fe ? i c dc current gain h fe base-emitter voltage v be (v) collector current i c (a) collector-emitter voltage v ce (v) collector current i c (a) safe operating area 10 6 4 2 0 common emitter v ce = 5 v 8 0.8 1.2 1.6 0.4 0 2.0 tc = 100c 25c ? 25c 100 10 0.1 1 1 common emitter v ce = 5 v 0.01 1000 10 tc = 100c tc = ? 25c tc = 25c 200 10 6 4 2 0 i b = 10 ma 20 common emitter tc = 25 c 8 4 6 8 2 0 10 30 40 50 100 150 250 10 1 0.1 0.01 0.01 0.1 1 10 common emitter i c /i b = 10 100 tc = 100c tc = ? 25c tc = 25c 0.05 2 30 1 10 30 100 300 0.5 3 5 10 *: single nonrepetitive pulse tc = 25c curves must be derated linearly with increase in temperature. i c max (continuous) i c max (pulsed)* v ceo max dc operation tc = 25c 1 ms* 10 ms* 100 ms* 0.3 0.1 3
2SC5198 2006-11-10 4 restrictions on product use 20070701-en ? the information contained herein is subject to change without notice. ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshib a products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconduct or devices,? or ?toshiba semiconductor reliability handbook? etc. ? the toshiba products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuri ng equipment, industrial robotics, domestic appliances, etc.).these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. unintended usage of toshiba products listed in his document shall be made at the customer?s own risk. ? the products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringement s of patents or other rights of the third parties which may result from its use. no license is granted by implic ation or otherwise under any patents or other rights of toshiba or the third parties. ? please contact your sales representative for product- by-product details in this document regarding rohs compatibility. please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
|
